There are multiple configuration settings for SmartTEK. Each feature should be reviewed for relevance in your emulation environment.
Keyboard Maps
TEKTERM for Android (SmartTEK) connections utilizing TESS keyboard Maps support a wide range of mnemonics that are specific to TESS and are not available in other keyboard maps. Keyboard maps are installed through the StayLinked Administrator under Emulation Settings > Keyboard Maps > right click and select Add, or by double clicking the session in the Connections list while the session is presenting the eSP0003 error message and selecting the Add Keyboard Map in the Connection Details window.
Mnemonic Options
TEKTERM for Android (SmartTEK) Features allow for Mnemonic features custom to the TESS emulation process. Each button on the toolbar may be configured to perform one of the following actions:
Cursor Positioning | Session Control | StayLinked Mnemonics |
[backspace] | [del] | [call1] |
[tab] | [sess] | [call2] |
[down] | [disabled] | [call3] |
[left] | [host] | [device-exit] |
[right] | [abort] | [keyboard menu] |
[up] | [toggle status] | [staylinked menu] |
[delete] | [editmode field] | [toggle_sip] |
[enter] | [editmode fcursor] | [switch_session] |
[backtab] | [editmode insert] | [disconnect_device] |
[editmode replace] | [minimize_client] | |
[toggle status field displayed] | [execute_program] | |
[local procedures] | [increase_font] | |
[decrease_font] | ||
[renegotiate] | ||
[soft_trigger] | ||
[key=xxxxx] | ||
[keyboard_qwerty] | ||
[keyboard_numsym] | ||
[[keyboard_fkeys] | ||
[keyboard_ctrl] | ||
[keyboard_cycle] | ||
[tile_show] | ||
[tile_show#,#] | ||
[tile_hide] | ||
[tile_toggle] | ||
[tile_prev] | ||
[tile_next] | ||
[tile_cycle] | ||
[tile_refresh] | ||
[disabled] | ||
[hide] |
Function Key Customization
TEKTERM for Android (SmartTEK) features allow for customization of the function keys F1 to F39 on the server. Function keys start the transmission of data. There are a few preset function keys, these can be modified.
F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 |
F9 | F10 | F11-ESC | F12-BS | F13-LF | F14 | F15-Help | F16-Do |
F17 | F18 | F19 | F20 | F21-Find | F22-Insert Here | F23-Remove | F24-Select |
F25-Previous Screen | F26-Next Screen | F27 | F28 | F29 | F30 | F31 | F32 |
F33 | F34 | F35 | F36 | F37 | F38 | F39 |
Directional Mnemonics
TEKTERM for Android (SmartTEK) features allow for [up], [down], [right], and [left]. The TESS Emulation process has multiple edit modes that use these directional cursor movements. Please see specific mode directional below:
Field Mode | In field mode, the [right] and [left] arrow keys do not perform any functions. Pressing the [up] or [down] arrow key completes the entry field and then, moves the cursor to the previous or next field. |
Fcursor Mode | In fcursor mode, the [up], [down], [left] and [right] arrow keys move the cursor between fields. |
Insert Mode | In insert mode, the [right] and [left] arrow keys move the cursor right and left within a field. The [up] and [down] arrow keys complete the entry field and move the cursor to the previous or next field. |
Replace Mode | In replace mode, the [right] and [left] arrow keys move the cursor to the right and left within a field. The [up] and [down] arrow keys complete the entry field and move the cursor to the previous or next field. |
[del] Mnemonic
If the [del] key is used to clear data in a field that has been pre-filled by the host application, the field is flagged as modified and the updated information is sent to the host in the next response message.
[sess] Mnemonic
Gets you to a prompt to start a new telnet session.
[disabled] Mnemonic
Currently ignores the keystroke.
[host] Mnemonic
Mapped to the Standard ctrl+h TekTerm function – Displays the select host dialog if local procedure 80 has been sent by the controller.
[abort] Mnemonic
Mapped to the standard ctrl+c TekTerm function – Hitting this key 3 times within two seconds initiated the TekTerm user reset sequence.
[toggle_status] Mnemonic
Allows for [toggle status] of ctrl+s as a toggle key sequence. Pressing the key sequence displays the status message on the screen. Pressing the sequence, a second time hides the status message.
Share the post "TEKTERM for Android (SmartTEK) Feature Configuration"