Honeywell Licenses

Server versions 14.5 and newer support Honeywell Pre-Licensed, branded and specially licensed products. There are two types of Honeywell licensing.

• Pre-Licensed Devices – These Clients clearly display Pre-Licensed on the splash screen when loaded with the Honeywell Software Client Pack (SCP) version of the Client software. These Clients are non-transferrable and do not consume a concurrent-use license when connecting to a v14.5 or newer server. These devices are configurable for multi-session connections. Installations serving exclusively pre-licensed device models do not need a license installed on the server.
• Honeywell – Branded – Some Honeywell Android devices can run a SmartTE-branded version of the Client. These Clients can take advantage of special single-session licenses available from Honeywell.

Model	Re-Branded	Pre-Licensed
CN80	YES	YES
VM1A	YES	YES
CK65	YES	YES
EDA56	YES	NO
EDA57	YES	NO
EDA60K	YES	SKU Dependent
EDA61K	YES	SKU Dependent
CK62	YES	NO
CK67	YES	NO
CK75	YES	NO
CN51N	YES	NO
CN51Q	YES	NO
CN75E	YES	NO
CN80G A13	YES	NO
CT30XP	YES	NO
CT32	YES	NO
CT37	YES	NO
CT40	YES	NO
CT40XP	YES	NO
CT45	YES	NO
CT45XP	YES	NO
CT47	YES	NO
CT50	YES	NO
CT60	YES	NO
CT60XP	YES	NO
CT70	YES	NO
CW45	YES	NO
E75E	YES	NO
EDA10A	YES	NO
EDA50	YES	NO
EDA50K	YES	NO
EDA51	YES	NO
EDA52	YES	NO
EDA5S	YES	NO
EDA70	YES	NO
EDA71	YES	NO
RT10	YES	NO
VM3A	YES	NO

EDA61K SKU Requirements

Step one is to always make sure to run the latest client if pre-licensing does not work as expected. This includes both the server process and client version.

When reviewing the SKU, check the 3rd to the last digit:

EDA61K-xxxxxxx$xx

This character will be one of the following options:

•             “E” = Red Honeywell Splash Screen and is Pre-Licensed.

•             “D” = Red Honeywell Splash Screen and is Pre-Licensed.

•             “G” = Red Honeywell Splash Screen Re-Branded.  NON Pre-Licensed.

•             “All Else” = EDA61 Green Client.  Requires a standard StayLinked License.

Essentially, if it's E or D, it's pre-licensed. If it's G, you can utilize Honeywell-only licensing. Everything else is not re-branded.

You should see Pre-Licensed right on the splash screen for qualifying devices. See below, just under the client version.

If the gun doesn't show the Pre-Licensed, then the client isn't seeing the correct SKU and it will require a purchased license.

For more information on Honeywell products, contact them for software availability at www.honeywellaidc.com.